forum.wdlxtv.com

by **michael_engelen** » Tue Dec 27, 2011 5:37 am

Hi, I installed the 1.05.04 based WDLXTV-firmware yesterday after having used the 1.02.xx based firmware. I really like the 1.05.04 based version a lot better. It has all the good things of the original firmware plus goodies like YouTube HD and the great WebEnd-Interface. Thanks to all the developers working on this version!

by **custard** » Tue Dec 27, 2011 1:37 pm

d3vil wrote:I dont know if it's fixed in this "release" version, but I installed 1.05.04-0.5.1.1 "leak" a few weeks ago, and using Transmission.bin all the downloads were corrupted (to a NTFS drive).
1.05.04-0.5.0.0 is OK, had to downgrade.
Could it be a bug only in the pre-release version? Or maybe it has something to do with

* ntfs-3g removed from automagic filesystem detection (b-rad)

Same issue for me aswell. I found that downloads would show as complete, but on verifying them chunks of the files were found to be missing. Reverting to 0.5.0.0 solved the problem.

by **DesLee** » Tue Dec 27, 2011 6:39 pm

Re: 1.05.04_V-WDLXTV-Live-0.5.1.1 discussion
by emielm » Wed Dec 21, 2011 4:17 am

I have a problem with the 5.1 DTS sound.
With the original firmware there was a option in the menu for HDMI-Trough-pass.

with 1.05.04_V-WDLXTV-Live-0.5.1.1 [flash] This is option is gone and there is only a Digital pass-trough option or Digital pass-trough via optical only.

I have my WDTV live connected like this. [WDTVlive]-----hdmi-----[TV]----optical-----[Receiver]

At first I thought it maybe the specsific files which I'm using, but that's not the case.
I downgraded to the original firmware: "wdtvlive_1.06.15_V officiele firmware"
Then I can just go into the sound/video menu and select HDMI passtrough and everything works fine.

Is there some setting I need to set in the WDLXTV firmware or is this a bug or something?
I'm lost.....

I have had this issue even before the latest upgrade. I have to connect the wdtv-live to my receiver directly in order to receive the DTS signal. Could it be an issue with my TV not passing through the DTS bitstream? Any suggestions will be v helpful.

Thanks!

by **custard** » Wed Dec 28, 2011 12:01 am

DesLee wrote:
I have had this issue even before the latest upgrade. I have to connect the wdtv-live to my receiver directly in order to receive the DTS signal. Could it be an issue with my TV not passing through the DTS bitstream? Any suggestions will be v helpful.

Thanks!

that will be down to the tv not the wdlxtv.

by **brandaopj** » Thu Dec 29, 2011 7:17 pm

i am with trouble to share a folder with a NFS server. I follow this http://wiki.wdlxtv.com/Sharing_from_OSX but i can not see the folder in the wdtv.
I am getting permission denied when i run the amount command in telnet.
I run this:
xmount 192.168.1.104:/users/brandaopj/Shared Shared nfs "proto=tcp"

I am using a mac and the ip address is from mac.

Is there any option or something that must be done in this new firmware?

by **recliq** » Fri Dec 30, 2011 7:58 am

Don't double post, read the wiki about xmounts, especially the troubleshooting section.

by **Stealth3si** » Fri Dec 30, 2011 12:11 pm

I'm on 1.02.21-WDLXTV-Live-0.4.7.3 because AFIAK it's the latest version that supports wdtvext plugins and moviesheets+ 2.0+ which are the only extra features of wdlxtva/wdtvext I use atm.

Is there a later firmware version that supports this?

by **RMerlin** » Fri Dec 30, 2011 1:04 pm

Stealth3si wrote:I'm on 1.02.21-WDLXTV-Live-0.4.7.3 because AFIAK it's the latest version that supports wdtvext plugins and moviesheets+ 2.0+ which are the only extra features of wdlxtva/wdtvext I use atm.

Is there a later firmware version that supports this?

There's a 0.5.1.1 release with a BaseFW of 1.02.21, check in the Firmware Releases forum.

by **DesLee** » Fri Dec 30, 2011 8:32 pm

I think I'm missing something really simple here, hoping someone can point me in the right direction.
I have set up Hanewin NFS Server and ran xmount as directed in the wiki. I am able to access the mount and its files from shell on WDLXTV, but the folder is not showing up as a local drive on the GUI.

Thanks and Happy New Year to all in advance!

Code: Select all: # df -k . Filesystem Size Used Available Use% Mounted on 192.168.1.100:/3D_Movies 931.5G 865.1G 66.4G 93% /tmp/media/usb/3DMovies

by **KAD** » Fri Dec 30, 2011 10:25 pm

yeah, you didn't read the carefully, you must have a usb drive (thumbdrive etc) plugged in to have the local drives menu available

KAD

forum.wdlxtv.com

Who is online