Page 3 of 4

Re: 1.01.77-WDLXTV-G2-0.4.5.3 discussion thread

PostPosted: Wed Jun 01, 2011 4:31 am
by invisired
I'm updating my G2 with standard firmware to this 1.01.77-WDLXTV-G2-0.4.5.3.

Firmware is recognize, and i make update normaly.. but stop on WD logo after rebooting..
USB is FAT32..

Whats goin on?

Thanks..
Sorry for my english..

Re: 1.01.77-WDLXTV-G2-0.4.5.3 discussion thread

PostPosted: Wed Jun 01, 2011 4:54 am
by invisired
I've done.. all wright! its ok!
i change the pendrive to another port on my WDTV and its work!!

Thanks.

Re: 1.01.77-WDLXTV-G2-0.4.5.3 discussion thread

PostPosted: Wed Jun 01, 2011 12:16 pm
by invisired
Hi!!!

Movie Sheet work with this version?
I have WDTV G2..

I only really want this function..

today i did upgrade to this version.. but i cant show sheet on WD.. only black screen.. tried -500k, 300k size..
nothing!!

Whats version can i do this???

Thanks a lot..

Re: 1.01.77-WDLXTV-G2-0.4.5.3 discussion thread

PostPosted: Wed Jun 08, 2011 11:06 pm
by tibimakai
I have beign using this fw for a while and it's all great, but I have one issue, I can't telnet to the player. what could be the problem. only a screen pops up with ssh dropbear 0.54... and nothing else.

Re: 1.01.77-WDLXTV-G2-0.4.5.3 discussion thread

PostPosted: Thu Jun 09, 2011 12:57 am
by mad_ady
You're probably telnetting on port 22 - which is the SSH port. Try to telnet to port 23 (telnet) or use ssh to connect (you need to have a root password set).

Re: 1.01.77-WDLXTV-G2-0.4.5.3 discussion thread

PostPosted: Fri Jun 17, 2011 4:44 pm
by tibimakai
I'm trying with putty, punch in 192.168.1.102(wdtv ip) select telnet(port 22 it's selected automatically) and open. when the telnet window pops up the only thing showing is ssh-2.0-dropbear_0.50.
I don't know how to set a password for ssh.

Re: 1.01.77-WDLXTV-G2-0.4.5.3 discussion thread

PostPosted: Sun Jun 19, 2011 8:12 am
by mad_ady
There must be a problem with your putty connection. Next time type in port 23 manually and you will be connected via telnet.
Log in (root + enter) and set a root password by typing
Code: Select all
passwd


Then you should be able to connect with ssh on port 22 (login with root and the new password you set above).

Re: 1.01.77-WDLXTV-G2-0.4.5.3 discussion thread

PostPosted: Sun Jun 19, 2011 4:22 pm
by tibimakai
thank you for helping me. actually I'm getting somewhere now, but it's still not all ok.
if I punch in my wdtv's ip and punch in port 23 and do not select telnet it opens up the window and it asks the user.
I have tried root and enter, but it sais that access is denied.
I've already set the user and password on my webend, that matters? it doesn't work with that either. I have different user and password(wdlxtv on both).

Re: 1.01.77-WDLXTV-G2-0.4.5.3 discussion thread

PostPosted: Sun Jun 19, 2011 10:04 pm
by mad_ady
Try specifying IP, protocol (telnet) and port (23). Otherwise it might try to connect with protocol ssh on the telnet port and viceversa.
It should look like in this image:
http://www.weethet.nl/images/tivo/tivo62_putty.gif

Refer to your README that came with your firmware for default telnet user/password (or re-read the above posts) (they are different from the web interface user/password).

Re: 1.01.77-WDLXTV-G2-0.4.5.3 discussion thread

PostPosted: Thu Jul 28, 2011 7:57 pm
by clight77
Does v 4.5.3 support mkv header compression,as i have to remux many mkv movies to get sound.