Sign up here and you can log into the forum!

Getting fucking BURNOUT with s00custom

Feature Requests and Proposals for inclusion into WDLXTV-Live

Getting fucking BURNOUT with s00custom   

Postby givemeadvice » Mon Oct 28, 2013 10:22 am

Hello,
i successfully flashed my WD TV Live HD Media Player on Firmware-Version: 1.05.04_V.WDLXTV_LIVE-0.5.1.1
I also created Moviesheets via ThumbGen named "Name.mkv_sheet" and copied in the same folder like the movie.
My problem: I don't see any Moviesheets on my TV.


Then i changed the s00custom-options like this:

Code: Select all
#!/bin/sh
##
## in this file you can enter commands that will be executed with the init.d scripts
## typos / syntax errors will prevent the osd from booting
## this file is only executed if it is at the root of an attached device at boot
##  *** NO REFLASH IS REQUIRED: S00custom-options is executed EVERY boot ***
##
## several examples are provided below, uncomment (delete #) them to use
##
##
## config_tool commands only need to be executed _once_ then they can be re-commented
## ***NOTE*** commenting a config_tool command does *NOT* disable it
##            you must change a setting back to default manually
##
##
## NOTE: THIS FILE IS FAIRLY DEPRECATED AND NO LONGER CONTAINS EVERY OPTION
##  YOU ARE RECOMMENDED TO NAVIGATE TO THE WEBEND AND USE THE WLDXTV CONFIGURATOR
##  SIMPLY ENTER YOUR WDTV'S IP ADDRESS IN YOUR BROWSER AND L/P IS:
##       wdlxtv   /   wdlxtv
##
##

## change background image between 3 stock options, or arbitrary location
## background image **CAN NOT** be larger than 512KB
##
## the following three images are included in the firmware
## original background:
#config_tool -c BACKGROUND_IMAGE=original_bg.jpg
## eM82's backdrop background:
#config_tool -c BACKGROUND_IMAGE=eM82_bg.jpg
## Pennhaven's chrome backdrop background:
#config_tool -c BACKGROUND_IMAGE=pennhaven_bg.jpg
## wood panel (default) background:
#config_tool -c BACKGROUND_IMAGE=villa_bg.jpg
##
## To set an absolute location:
#config_tool -c BACKGROUND_IMAGE=/tmp/mnt/123ed956-1256-4825-9e79-86fc1e0febaa/random/location.jpg
##
## You can also supply an image, on an attached device at boot (like S00custom-options),
## which is 1280x720 and *NO* larger than 512KB named villa_bg.jpg and it will be used as the custom background
## *ONLY* villa_bg.jpg will work in this method, and *you may remove the device if you desire* after the background has been loaded
##


## change screen saver image between wdlxtv & original WD logo's, or arbitrary location
##
## wdlxtv logo
#config_tool -c SCREEN_SAVER_IMAGE=screen_saver.png
## original WD logo
#config_tool -c SCREEN_SAVER_IMAGE=screen_saver.orig.png
## some random location (absolute)
#config_tool -c SCREEN_SAVER_IMAGE=/tmp/mnt/123ed956-1256-4825-9e79-86fc1e0febaa/some/random/screensaver-image.png
##
## You can also supply an image, on an attached device at boot (like S00custom-options),
## which is *NO* larger than 512KB named screen_saver.png and it will be used as the custom screen saver image
## *ONLY* screen_saver.png will work in this method, and *you may remove the device if you desire* after screen_saver.png has been loaded
##

## Enable linksheets moviesheet scanner for moviesheets
## REQUIRED on non-1.02.21 based WDLXTV's!!!
config_tool -c LINKSHEETS=ON

## Movie sheet modes (only one can be enabled at a time)
## unless you have sheets for each mode you will encounter oddities switching around modes
## AKA this isn't magic
##   Full screen std mode:
config_tool -c MSHEETMODE=std
##   1280x460 (horizontal banner at top) sheet mode:
#config_tool -c MSHEETMODE=sheet
##   500x720 (vertical banner on right) wall mode:
#config_tool -c MSHEETMODE=wall

## turn on moviesheets for a list type  (ON/OFF)
## you must turn it on for a view type to see sheets!
##   video thumb mode
config_tool -c VIDMSHEET=ON
##   audio/photo thumb mode
#config_tool -c GENMSHEET=ON
##   list mode (video/audio/photo)
#config_tool -c LISTMSHEET=ON

## enable a central moviesheet repository
## allows all moviesheets to exist in one location
#config_tool -c MSHEETDIR=/tmp/media/usb/someWhere


## enable auto framerate/resolution functionality
#### keeps OSD at menu selected resolution,
#### but changes to suit every viewed video
#### also downmixes multi-channel AAC -> stereo, so that it plays on the wdtv
## to customize settings edit /conf/autores.conf
config_tool -c AUTORES=ON

## enable forced-HDMI resolutions instead of highest compatible EDID
#### this setting is for displays who have bad EDID
#### or whose display has hidden resolutions not in the EDID
## **** this setting should not be dangerous, but still be careful ****
#config_tool -c FORCEHDMI=ON


## enable auto-zoom overscan fix
#### this setting zooms out automatically the 
#### number of times below, when videos are played
#config_tool -c DEFAULT_ZOOM=1


## change list view to 4/6/8/11 entries
config_tool -c LISTNUM=4
#config_tool -c LISTNUM=6
#config_tool -c LISTNUM=8
#config_tool -c LISTNUM=10   (default)
#config_tool -c LISTNUM=11
#config_tool -c LISTNUM=12


## change video thumb view to various amounts of thumbs
#THUMBRESO=120x160 has been removed due to OSD crashing issues
#config_tool -c THUMBRESO=150x200   # 12
config_tool -c THUMBRESO=163x245   # 8   (default)
#config_tool -c THUMBRESO=180x240   # 10
#config_tool -c THUMBRESO=225x300   # 4
#config_tool -c THUMBRESO=240x360   # 4


## change music/photo thumb view to 10/15 thumbs
#config_tool -c GENTHUMBS=10      # 10 
#config_tool -c GENTHUMBS=15      # 15   (default)


## change video info overlay
## ( for subtitle viewing during pause/timing/etc)
## requires reboot after change
## upper ~60%
#config_tool -c VIDEO_INFO_BAR=2
## top (warning: options bar covers up info overlay with setting 3)
#config_tool -c VIDEO_INFO_BAR=3


## change subtitle size to one not menu-selectable
#config_tool -c SUBTITLE_FONT_SIZE=44
#config_tool -c SUBTITLE_FONT_SIZE=48
#config_tool -c SUBTITLE_FONT_SIZE=50
#config_tool -c SUBTITLE_FONT_SIZE=52
#config_tool -c SUBTITLE_FONT_SIZE=56
#config_tool -c SUBTITLE_FONT_SIZE=60
#config_tool -c SUBTITLE_FONT_SIZE=64
#config_tool -c SUBTITLE_FONT_SIZE=68
#config_tool -c SUBTITLE_FONT_SIZE=72
#config_tool -c SUBTITLE_FONT_SIZE=76
#config_tool -c SUBTITLE_FONT_SIZE=80


## permanently set timezone
## http://www.timeanddate.com/library/abbreviations/timezones/
## below is for Pacific North America
#config_tool -c TIMEZONE=PST8PDT


## permanently set hostname
#config_tool -c DEVICE_NAME=SomeHostName


## use custom USB slot icons (default: ON)
#config_tool -c USBICONS='OFF'


## disable telnet server (default: ON)
#config_tool -c TELNETD=OFF


## set custon telnet server port (default: 23)
#config_tool -c TELNETPORT=49532


## disable pure-ftpd server (default: ON)
#config_tool -c FTPD=OFF


## disable dropbear ssh server (default: ON)
#config_tool -c SSHD=OFF


## set custon dropbear ssh server port (default: 22)
#config_tool -c SSHPORT=62356


## disable keep alive of ethernet during WDTV Live standby
#config_tool -c DISABLE_ETHERNET_ON_STANDBY=YES


## delay net.mounts execution in case of wireless adapter usage and shares not showing up
#config_tool -c NET_MOUNTS_DELAY=30


## automagic IP obtain at boot (default: OFF)
## required for NTP=ON
#config_tool -c IPUP=OFF

## enable NTP - network time (default: OFF)
## *** NTP requires IPUP=ON ***
#### *** ONLY with wireless: NTP adds ~20s to the initial boot of the device ***
#### *** due to the bringing up and acquisition of wireless network address  ***
## -- if NTP fails because of slow address acquire you can increase delay to NTP_DELAY
#config_tool -c NTP=ON

## custom NTP server
#config_tool -c NTPSERVER=pool.ntp.org

## NTP delay is seconds (in case of slow wireless adapter)
#config_tool -c NTP_DELAY=0


## Disable mt-daapd digital audio server (saves ~10MB ram)
#config_tool -c MT-DAAPD=OFF


## Disable pandora binary (saves ~2MB ram)
#config_tool -c PANDORA=OFF


## Disable UMSP (default: ON - REQUIRES APACHE=ON TO WORK)
#config_tool -c UMSP=OFF


## Disable Apache webserver (default: ON)
## WARNING: Disabling Apache will make UMSP, youtubeHD, shoutcast, and (of course) the webend stop working!
#config_tool -c APACHE=OFF


## enable rtorrent bittorrent client (default: OFF)
## *** SSH server must be enabled to start rtorrent ***
## *** apache webserver must be enabled to use webui ***
## RTORRENT_DIR *MUST* be set for full functionality!
## rutorrent & rtorrent DEPEND on it
#config_tool -c RTORRENT=ON

## set rtorrent data location for incomplete/session/finished/rutorrent
#### the line below is an EXAMPLE! To have your device mounted at /tmp/mnt
#### create a file on it called: .mnt
#config_tool -c RTORRENT_DIR=/tmp/mnt/123ed956-1256-4825-9e79-86fc1e0febaa/


## Enable nzbget usenet client (default: OFF)
## *** apache webserver must be enabled to use webui ***
#config_tool -c NZBGET=ON


## Disable online-delayer (in case of stalled network detection)
## or because nzbget / rtorrent / net.mounts / etc won't execute
#config_tool -c ONLINEDELAYER=OFF


## power actions are executed when the OSD is suspended/resumed
## ***NOT*** executed when your wdtv live comes on from cold boot / power cycle
## executed when:
## -----the wdtv live goes into standby via remote
## -----the wdtv live wakes up from suspend via remote
## --use S00custom-options or S00user-script for actions that happen at boot
## *** DO NOT EXECUTE usb.power.on OR usb.power.off IN ETHERNET ACTIONS *** SEE USB_POWER_OFF setting ***
## [you may have number actions which are executed in order]
##
#config_tool -c POWER_UP_ACTION='logger -t "power_up_action" "I am doing something"'
#config_tool -c POWER_UP_ACTION20='sleep 5; ether-wake -b xx:xx:xx:xx:xx:xx; sleep 10; /etc/init.d/S90net.mounts start'
#config_tool -c POWER_DOWN_ACTION='logger -t "power_down_action" "the OSD has been suspended!"'


## Enable/Disable Samba Windows share server (default: OFF)
## ON:
#config_tool -c ENABLE_SAMBA_SHARE=1
## OFF:
#config_tool -c ENABLE_SAMBA_SHARE=0

## Change SMB resolve order to 'proper' order
##  YMMV
## this MUST contain either valid settings or be blank
## stock/official firmware order:
#config_tool -c SMB_RESOLVEORDER='bcast lmhosts wins host'
## proper/corrected order:
#config_tool -c SMB_RESOLVEORDER='lmhosts host wins bcast'
## fixes missing / non-working network shares (bad DNS):
#config_tool -c SMB_RESOLVEORDER='lmhosts wins bcast'

## Change Samba share export to not allow guest (anonymous) mounting
## smbpasswd is stored in /conf
#### This setting requires a reboot if executed manually (telnet/ssh instead of S00 script)
##
#config_tool -c SAMBA_SERVER_PROTECTION_STATE=1
#config_tool -c SYSTEM_USERNAME='SambaUser'
#config_tool -c SYSTEM_PASSWORD='SambaUser'
#config_tool -c SMBSHARE_USERNAME='SambaUser'
#config_tool -c SMBSHARE_PASSWORD='SambaUser'

## Enable guest read only access, plus user protected write access
#### This setting makes no sense without the settings above set
##
#config_tool -c SAMBA_PROTECTION_WITH_GUEST=1

## Disable/enable Samba exported shares on standby (default: ON)
#config_tool -c SMB_STANDBY=OFF

## Disable/enable Samba auto export mode (default: ON)
#config_tool -c SMBD_AUTO=OFF

## set Samba Workgroup
#config_tool -c SAMBA_WORKGROUP=SomeWorkgroup


## Enable NFSD kernel NFS server (default: OFF)
#config_tool -c NFSD=ON

## Enable NFSD auto export mode (default: OFF)
## (requires NFSD_AUTO_DEFAULT)
## (overrides /conf/exports)
#config_tool -c NFSD_AUTO=ON

## NFSD auto export mode default setting
#config_tool -c NFSD_AUTO_DEFAULT='192.168.0.234(rw,async,no_subtree_check) 192.168.0.199(rw,async,no_subtree_check)'


## turns off 5V to USB Bus on standby (when you press power off on remote)
## this action is prevented by the following:
##  - root.bin active
##  - OSD Theme active
##  - Optware active
##  - app.bin active
##  - Deluge or NZBget enabled
#config_tool -c USB_POWER_OFF=1


## Select one of the extra translations, that is not selectable from the language options
## Only possible to set ONE locale
## Choices:
## - Netherlands: nl
## - Greece: gr
## - Catalan: ca
## - Hungarian: hu
## - Slovak: sk
## - Polish: pl
#config_tool -c LOCALE=nl
#config_tool -c LOCALE=gr
#config_tool -c LOCALE=ca
#config_tool -c LOCALE=hu
#config_tool -c LOCALE=sk
#config_tool -c LOCALE=pl


## enable YouTube Switcher (You can only use one at a time!)
## to enable YouTube HD:
## *** youtubeHD requires setting YOUTUBE_QUALITY too ***
#config_tool -c YOUTUBE_SWITCHER=youtubeHD
## to enable EasyNews XViD proxy:
#config_tool -c YOUTUBE_SWITCHER=easynews
## to disable YouTube Switcher:
#config_tool -c YOUTUBE_SWITCHER=''

## EasyNews YouTube Switcher settings
#config_tool -c EASYNEWS_USER=user
#config_tool -c EASYNEWS_PASSWORD=password


## youtubeHD YouTube Switcher quality setting
#config_tool -c YOUTUBE_QUALITY=270P
#config_tool -c YOUTUBE_QUALITY=360P
#config_tool -c YOUTUBE_QUALITY=480P
#config_tool -c YOUTUBE_QUALITY=720P
config_tool -c YOUTUBE_QUALITY=1080P


## Live365 Switcher (You can only use one at a time!)
## to enable Shoutcast
#config_tool -c LIVE365_SWITCHER=shoutcast
## go back to live365
#config_tool -c LIVE365_SWITCHER=''


## EIRI (remote control remapping & action)
## requires /conf/eiri.conf or eiri.conf on device at boot
#config_tool -c EIRI=ON


## WDTVExt internal plugin debug level
## 0 : logging disabled (default)
## 1-5 : higher levels of output (1 least -> 5 most)
#config_tool -c MOVIESHEET_DEBUG=5
#config_tool -c RELOADER_DEBUG=5


## WDLXTV Census - registers your device with fwup.wdlxtv.com
## **** 100% optional ****
##  *** default: OFF ***
#config_tool -c WDLXTV_CENSUS=ON


## extra NLS / codepage packages (for non-english character filesystems)
##
## NLS packages (default utf8)
#config_tool -c IOCHARSET=utf8
#config_tool -c IOCHARSET=ascii
#config_tool -c IOCHARSET=euc-jp
#config_tool -c IOCHARSET=iso8859-13
#config_tool -c IOCHARSET=iso8859-14
#config_tool -c IOCHARSET=iso8859-15
#config_tool -c IOCHARSET=iso8859-2
#config_tool -c IOCHARSET=iso8859-3
#config_tool -c IOCHARSET=iso8859-4
#config_tool -c IOCHARSET=iso8859-5
#config_tool -c IOCHARSET=iso8859-6
#config_tool -c IOCHARSET=iso8859-7
#config_tool -c IOCHARSET=iso8859-9
#config_tool -c IOCHARSET=koi8-r
#config_tool -c IOCHARSET=koi8-ru
#config_tool -c IOCHARSET=koi8-u

## codepage packages (default cp437)
#config_tool -c CODEPAGE=cp1250
#config_tool -c CODEPAGE=cp1251
#config_tool -c CODEPAGE=cp1255
#config_tool -c CODEPAGE=cp437
#config_tool -c CODEPAGE=cp737
#config_tool -c CODEPAGE=cp775
#config_tool -c CODEPAGE=cp850
#config_tool -c CODEPAGE=cp852
#config_tool -c CODEPAGE=cp855
#config_tool -c CODEPAGE=cp857
#config_tool -c CODEPAGE=cp860
#config_tool -c CODEPAGE=cp861
#config_tool -c CODEPAGE=cp862
#config_tool -c CODEPAGE=cp863
#config_tool -c CODEPAGE=cp864
#config_tool -c CODEPAGE=cp865
#config_tool -c CODEPAGE=cp866
#config_tool -c CODEPAGE=cp869
#config_tool -c CODEPAGE=cp874
#config_tool -c CODEPAGE=cp932
#config_tool -c CODEPAGE=cp936
#config_tool -c CODEPAGE=cp949
#config_tool -c CODEPAGE=cp950
Last edited by kroetkroet on Tue Oct 29, 2013 3:42 am, edited 1 time in total.
Reason: ADDED CODE TAGS - NOW GOT HERNIA IN MY MOUSE
givemeadvice
n00b
 
Posts: 1
Joined: Mon Oct 28, 2013 10:11 am

Re: Getting fucking BURNOUT with s00custom   

Postby KAD » Mon Oct 28, 2013 2:35 pm

firstly - use code tags, so that your post is readable

second, visit the wiki and you'll find
1. WEC - online gui for changing all these settings
2. guide on how to set up linksheets - which would show that the missing piece is likely you forgot to turn off display file size in the regular settings menu
If you like my work please consider a Donation. Donate
Please read the appropriate documentation before posting questions! READ ME FAQ WIKI
PM's are for private matters. Post support questions to the appropriate forum, or they will be ignored.
User avatar
KAD
Global Moderator
 
Posts: 5103
Joined: Mon Apr 12, 2010 4:59 pm
Location: Seattle, WA USA


Return to Requests

Who is online

Users browsing this forum: No registered users and 1 guest