

# Default directory to save the downloaded torrents.
directory = /tmp/mnt/709878039877C5DE/filme
# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
session = /tmp/mnt/709878039877C5DE/rtorrent/.session
# Watch a directory for new torrents, and stop those that have been
# deleted.
schedule = watch_directory,5,5,load_start=/tmp/mnt/709878039877C5DE/rtorrent/torrents/*.torrent
schedule = untied_directory,5,5,stop_untied=
# Port range to use for listening.
port_range = 48755
# Start opening ports at a random position within the port range.
port_random = no
# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
check_hash = no
# Enable safe sync since hash check on complete is disabled
safe_sync = yes
# Set whetever the client should try to connect to UDP trackers.
use_udp_trackers = yes
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
encryption = allow_incoming,enable_retry,prefer_plaintext
# Enable DHT support for trackerless torrents or when all trackers are down.
# May be set to "disable" (completely disable DHT), "off" (do not start DHT),
# "auto" (start and stop DHT as needed), or "on" (start DHT immediately).
# The default is "off". For DHT to work, a session directory must be defined.
#
dht = off
# Enable peer exchange (for torrents not marked private)
#
peer_exchange = no


# This is an example resource file for rTorrent. Copy to
# ~/.rtorrent.rc and enable/modify the options as needed. Remember to
# uncomment the options you wish to enable.
# Maximum and minimum number of peers to connect to per torrent.
#min_peers = 40
#max_peers = 100
# Same as above but for seeding completed torrents (-1 = same as downloading)
#min_peers_seed = 10
#max_peers_seed = 50
# Maximum number of simultanious uploads per torrent.
#max_uploads = 15
# Global upload and download rate in KiB. "0" for unlimited.
download_rate = 1000
upload_rate = 100
# Default directory to save the downloaded torrents.
directory = /tmp/mnt/709878039877C5DE/filme
# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
session = /tmp/rt/rtorrent/.session
# Watch a directory for new torrents, and stop those that have been
# deleted.
schedule = watch_directory,5,5,load_start=/tmp/media/usb/USB1/709878039877C5DE/rtorrent/torrents/*.torrent
schedule = untied_directory,5,5,stop_untied=
# Move completed torrents
#system.method.set_key = event.download.finished,move_complete,"execute=mv,-u,$d.get_base_path=,/tmp/rt/rtorrent/finished/;d.set_directory=/tmp/rt/rtorrent/finished/"
# Move closed torrents
#system.method.set_key = event.download.closed,move_complete,"execute=mv,-u,$d.get_base_path=,/tmp/rt/rtorrent/finished/ ;d.set_directory=/tmp/rt/rtorrent/finished/"
# Close torrents when diskspace is low.
schedule = low_diskspace,5,60,close_low_diskspace=100M
# Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.
# example: stop at ratio 1.05 with at least 50 MB uploaded, or else ratio 300.0
ratio.enable=
ratio.min.set=105
ratio.max.set=300
ratio.upload.set=50M
# Changing the command triggered when the ratio is reached.
system.method.set = group.seeding.ratio.command, d.close=, d.erase=
# Start rutorrent plugins when rtorrent starts (for RSS / etc)
execute = {sh,-c,/usr/bin/php-cgi /var/www/plugins/rutorrent/php/initplugins.php wdlxtv &}
# The ip address reported to the tracker.
#ip = 127.0.0.1
#ip = rakshasa.no
# The ip address the listening socket and outgoing connections is
# bound to.
#bind = 127.0.0.1
#bind = rakshasa.no
# Port range to use for listening.
port_range = 48755-48755
# Start opening ports at a random position within the port range.
port_random = no
# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
check_hash = no
# Enable safe sync since hash check on complete is disabled
safe_sync = yes
# Set whetever the client should try to connect to UDP trackers.
use_udp_trackers = no
# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
encryption = none
# Enable DHT support for trackerless torrents or when all trackers are down.
# May be set to "disable" (completely disable DHT), "off" (do not start DHT),
# "auto" (start and stop DHT as needed), or "on" (start DHT immediately).
# The default is "off". For DHT to work, a session directory must be defined.
#
dht = off
# UDP port to use for DHT.
#
dht_port = 46881
# Enable peer exchange (for torrents not marked private)
#
peer_exchange = no
#
# Do not modify the following parameters unless you know what you're doing.
#
# Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
hash_read_ahead = 5
# Interval between attempts to check the hash, in milliseconds.
hash_interval = 10
# Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
hash_max_tries = 5
# scgi port for rutorrent
scgi_port = localhost:5000






Users browsing this forum: No registered users and 7 guests