[REQUEST - £10 waiting!] SABNZB+

[desmoloch]

i´m using 0.4.7.3 (FW base 1.02.21) ext3.
yes i googled that error and that might be an out of memory problem. I have "installed" ppweb, but that are only some scripts for nzb post processing. I disabled all stuff (ftp, samba, etc...), except ssh.
Here is my cpu usage:

Code: Select all

Mem: 183552K used, 15504K free, 0K shrd, 5520K buff, 121120K cached
CPU:  0.0% usr  0.0% sys  0.0% nic  100% idle  0.0% io  0.0% irq  0.0% sirq
Load average: 0.08 0.09 0.12 1/78 8929
  PID  PPID USER     STAT   VSZ %MEM CPU %CPU COMMAND
8929  8928 www-data R     3648  1.8   0  0.0 top -n1
2219     1 root     S     184m 94.6   0  0.0 /bin/dmaosd start
2202     1 root     S    92656 46.3   0  0.0 MediaLogic AV MSGL_FATAL
3120  3107 root     S    32000 16.0   0  0.0 /bin/scan_manager
8927  4402 www-data S    26464 13.2   0  0.0 /usr/bin/php-cgi
2207     1 root     S    21152 10.5   0  0.0 MediaLogic_PIC PC MSGL_FATAL
3121  3107 root     S    12368  6.1   0  0.0 grep -v mktime fails.
3107  2219 root     S    12240  6.1   0  0.0 /bin/sh /bin/run_cas
3457     1 root     S    12240  6.1   0  0.0 crond -b
1585     1 root     S    10544  5.2   0  0.0 eirid 300
4182  1997 www-data S     9408  4.7   0  0.0 /usr/sbin/apache2 -k start
4155  1997 www-data S     9408  4.7   0  0.0 /usr/sbin/apache2 -k start
2331  1997 www-data S     9408  4.7   0  0.0 /usr/sbin/apache2 -k start
4402  1997 www-data S     9408  4.7   0  0.0 /usr/sbin/apache2 -k start
5073  1997 www-data S     9408  4.7   0  0.0 /usr/sbin/apache2 -k start
1997     1 root     S     9088  4.5   0  0.0 /usr/sbin/apache2 -k start
2206     1 root     S     5568  2.7   0  0.0 DMARender
1365     1 root     S     4352  2.1   0  0.0 /bin/memory_cache_server
    1     0 root     S     3712  1.8   0  0.0 /bin/sh /init
1366     1 root     S     3712  1.8   0  0.0 /bin/sh

184 mb for dmaosd start, is that normal?

[ch1ptune]

Hmm.. Don't know tbh. Mine's 164m.

Have you tried opening /tmp/messages.txt to see if you can read something more detailed from it regarding the segmentation fault error?

/ch1ptune

[RMerlin]

184 mb for dmaosd start, is that normal?

Yes.

[desmoloch]

Thank you RMerlin

Have you tried opening /tmp/messages.txt to see if you can read something more detailed from it regarding the segmentation fault error?

/ch1ptune

yep but there is nothing logged

[suferjunner]

Hi,

I can't get to the auto sabnzb.ini file creation. I keep getting an error after I do the following:

Code: Select all

# /opt/bin/python2.6 /opt/share/SABnzbd/SABnzbd.py -f /opt/share/SABnzbd/sabnzbd.ini

/opt/bin/python2.6: can't handle reloc type 0x2f

I'm not very proficient in command line, I used an SFTP to SSH into my WDLXTV Live using Cyberduck for Mac to transfer the new SABnzbd+ 0.6.7 files. I did manage to complete the install using ipkg, but cannot log into the SABnzbd+ web interface using http://"myip":8080.

Please advise, thanks!

[suferjunner]

I did a fresh opt.bin transfer and now I'm getting the "Segmentation fault" error...

Any help will be greatly appreciated!

[suferjunner]

I tried doing all the steps over and over again with no luck. I either get the segmentation error or the reloc error.

Does anyone have a fix for this or at least another method to get SABnzbdplus working on the wdlxtv??

[suferjunner]

Got it to work by updating to 1.03.49_V... and then completing all the steps again.

[deputysalty]

I got through the guide fine until I went through the initial setup of Sabnzbd where it reboots itself. After that point, I can't get the web interface working. I tried starting it up with different ports, I am using 0.0.0.0. It works during initial setup, but then it stops working after the initial setup

[fuzzydunlop]

I got through the guide fine until I went through the initial setup of Sabnzbd where it reboots itself. After that point, I can't get the web interface working. I tried starting it up with different ports, I am using 0.0.0.0. It works during initial setup, but then it stops working after the initial setup

I think I'm having the same issue. I can go through the wizard but as soon as that is finished and I try to access the live app I get nothing. Did you have any joy in sorting this out?